 |
Back |
For full Warranty details please refer to the product profile!
37ml cart10-1 kit
375ml cart 10-1 kit
1 pint 10-1 kit glass plastic
1 gallon kit 10 - 1 plastic glass
5 gallon kit 10 - 1 plastic metal
Engineering Materials - General Purpose - Potting and Encapsulating Materials
Details: R-2186 - All purpose silicone, encapsualnt or moulding, typical viscosity 80000 cps
| Product Profile: | R-2186.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusir-2186.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | R-2186 |
| Cure System: | Platinum |
| Work Time: | 2.5 H |
| Cure Time/Temp: | 15 M / 150°C |
| Specific Gravity: | 1.12 |
| Durometer Type A Typical: | 30 |
| Tensile psi Typical: | 1,050 |
| Tensile MPa Typical: | 7.2 |
| Elongation Percent Typical: | 450 |
| Tear PPI Typical: | 100 |
| Tear kN/m Typical: | 17.6 |
| Lap Shear psi/Mpa: | 475/3.3 |
| Dielectric Strength V/mil: | 640 |
| Operating Temp: | -65 to 240°C |
| Mix Ratio: | 10:1 |
| Colour: | Trans |
| Comments: | All purpose silicone, encapsualnt or moulding, typical viscosity 80000 cps |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
