 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Unrestricted - LSR Elastomers
Details: MED-4815 - Injection Molding Elastomer
| Product Profile: | MED-4815P.pdf |
|---|---|
| MSDS PDF A: | MED4815A.pdf |
| MSDS PDF B: | MED4815B.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Unrestricted |
| Description: | LSR Elastomers |
| NuSil ID: | MED-4815 |
| Cure System: | Platinum Addition |
| Solids Content: | 100 |
| Work Time: | 24 HR |
| Cure Time/Temp: | 5 M / 150 |
| Post Cure Time/Temp: | Optional |
| Specific Gravity: | 1.10 |
| Durometer Type A Typical: | 15 |
| Tensile psi Typical: | 925 |
| Tensile MPa Typical: | 6.4 |
| Elongation Percent Typical: | 925 |
| Tear PPI Typical: | 125 |
| Tear kN/m Typical: | 22.0 |
| Plasticity/Viscosity/Extrusion Typical: | 65 g/minute |
| Stress Strain: | 55 (0.4) @ 200 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Injection Molding Elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
