 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1 - 1 plastic
2 gallon kit 1 - 1 plastic bucket
10 gallon kit 1 - 1 plastic
Healthcare Materials - Restricted - LSR Elastomers
Details: MED-4915 - Injection Molding Elastomer
| Product Profile: | MED-4915.pdf |
|---|---|
| MSDS PDF A: | MED-4915 SDS.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | LSR Elastomers |
| NuSil ID: | MED-4915 |
| Cure System: | Platinum Addition |
| Solids Content: | 100 |
| Work Time: | 24 HR |
| Cure Time/Temp: | 5 M / 150 |
| Post Cure Time/Temp: | Optional |
| Specific Gravity: | 1.11 |
| Durometer Type A Typical: | 15 |
| Tensile psi Typical: | 750 psi |
| Tensile MPa Typical: | 5.2 MPa |
| Elongation Percent Typical: | 700 |
| Tear PPI Typical: | 111 |
| Tear kN/m Typical: | 19.6 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Injection Molding Elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
