 |
Back |
For full Warranty details please refer to the product profile!
Electronic Packaging Material - Potting and Encapsulating Materials
Details: EPM-2420 - Low Viscosity, Self-leveling Adhesive to Polyester and Polyether
| Product Profile: | EPM-2420P.pdf |
|---|---|
| MSDS PDF A: | EPM2420A.pdf |
| MSDS PDF B: | EPM2420B.pdf |
Basic Product Overview: |
|
| Section: | Electronic Packaging Material |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | EPM-2420 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | A:1,850 / B:1,200 |
| Cure System: | Platinum Addition |
| Solids Content: | - - |
| Work Time: | |
| Cure Time/Temp: | 1 h / 65 |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.01 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 30 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 400 |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 2.8 |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 150 |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Ionic Content* CI - K / Na ppm | <2 / <1 / <8 |
| Lap Shear psi/Mpa: | - - |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | -65 to 250 |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Low Viscosity, Self-leveling Adhesive to Polyester and Polyether |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
