 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Thermally Stable high temperate silicones
Details: R-2560 - For thermal insulating as a firewall sealant or as an ablative coating
| Product Profile: | R-2560P.pdf |
|---|---|
| MSDS PDF A: | R2560A.pdf |
| MSDS PDF B: | R2560B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Thermally Stable high temperate silicones |
| NuSil ID: | R-2560 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | 31 |
| Cure System: | Tin |
| Solids Content: | - - |
| Work Time: | - - |
| Cure Time/Temp: | 7D / RT |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.41 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 55 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 700 |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 4.8 |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 125 |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | 385/2.7 |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 100:0.5 |
| Colour: | Red |
| Comments: | For thermal insulating as a firewall sealant or as an ablative coating |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
