 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Thermally Stable high temperate silicones
Details: CV2-2566 - Thixotropic RTV Cure Primed Lap Shear 525psi (3.6MPa)
| Product Profile: | CV2-2566P.pdf |
|---|---|
| MSDS PDF A: | CV22566A.pdf |
| MSDS PDF B: | CV22566B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Thermally Stable high temperate silicones |
| NuSil ID: | CV2-2566 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | Thixotropic |
| Cure System: | Tin Condensation |
| Solids Content: | |
| Work Time: | 2 HR |
| Cure Time/Temp: | 7 D / R.T. |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.5 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | 55 |
| Tensile psi Certified: | |
| Tensile psi Typical: | 900 |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 6.2 |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | 140 |
| Tear PPI Certified: | |
| Tear PPI Typical: | 40 |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | 7.1 |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | 625/4.3 |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | -115 to 260 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 100:0.5 |
| Colour: | Red |
| Comments: | Thixotropic RTV Cure Primed Lap Shear 525psi (3.6MPa) |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
