 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Thermally Stable high temperate silicones
Details: CV10-2568 - Fast Cure Low Density Primed Lap Shear 140psi (1.0MPa)
| Product Profile: | CV10-2568P.pdf |
|---|---|
| MSDS PDF A: | CV102568A.pdf |
| MSDS PDF B: | CV102568B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Thermally Stable high temperate silicones |
| NuSil ID: | CV10-2568 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | PT Addition |
| Solids Content: | |
| Work Time: | 3 HR |
| Cure Time/Temp: | 30 M / 150 |
| Post Cure Time/Temp: | |
| Specific Gravity: | 0.76 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | 40 |
| Tensile psi Certified: | |
| Tensile psi Typical: | 235 |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | 1.6 |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | 170 |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | 175 |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | 860 |
| Operating Temp: | -115 to 260 |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 1:1 |
| Colour: | Red |
| Comments: | Fast Cure Low Density Primed Lap Shear 140psi (1.0MPa) |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
