 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Dampening Fluids and Lubricant
Details: S-7402 - High/Low Temperature Silicone Fluid - Diphenyl content offers improved thermal stability
| Product Profile: | S-7402P.pdf |
|---|---|
| MSDS PDF A: | S7402.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Dampening Fluids and Lubricant |
| NuSil ID: | S-7402 |
| Viscosity A: | |
| Viscosity B: | |
| Viscosity Mixed: | |
| Flow/Viscosity: | |
| Cure System: | Non-Curing |
| Solids Content: | |
| Work Time: | |
| Cure Time/Temp: | |
| Post Cure Time/Temp: | |
| Specific Gravity: | 1.01 |
| Durometer Type A Certified: | |
| Durometer Type A Typical: | |
| Tensile psi Certified: | |
| Tensile psi Typical: | |
| Tensile MPa Certified: | |
| Tensile MPa Typical: | |
| Elongation Percent Certified: | |
| Elongation Percent Typical: | |
| Tear PPI Certified: | |
| Tear PPI Typical: | |
| Tear kN/m Certified: | |
| Tear kN/m Typical: | |
| Ionic Content* CI - K / Na ppm | |
| Lap Shear psi/Mpa: | |
| Volume Resistivity** ohm·cm | |
| Dielectric Strength V/mil: | |
| Operating Temp: | -65 to 260°C |
| Plasticity/Viscosity/Extrusion Typical: | |
| Stress Strain: | |
| Mix Ratio: | 1 Part |
| Colour: | Trans |
| Comments: | High/Low Temperature Silicone Fluid - Diphenyl content offers improved thermal stability |
|
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
|
